- Home /
- Our chimne… /
Chimney Leak & Flashing Repair
Section: Chimney Leak & Flashing Repair
Professional chimney leak detection and flashing repair across Suffolk County. Stop roof leaks, water damage, and interior staining with licensed and insured chimney waterproofing and flashing services.
A leaking chimney is one of the most common causes of roof and interior water damage for Long Island homeowners.
Water can enter through damaged flashing, cracks in brick or mortar, deteriorated crowns, or gaps around the flue. If ignored, chimney leaks can cause mold, ceiling stains, rot, rust, and structural damage.
Village Chimney provides licensed and insured chimney leak detection and flashing repair across Suffolk County, with over 27 years of experience solving chimney and roofline water issues.
We diagnose the leak, stop the water intrusion, and protect your home from long-term damage.
Common Causes of Chimney Leaks
Most chimney leaks occur due to one of these issues:
1. Damaged or Improper Flashing
Flashing is the metal barrier that seals the joint between the roof and chimney.
If flashing is:
- rusted
- cracked
- loose
- improperly installed
- unsealed
…it can allow water to flow directly into your attic or walls.
2. Cracked Chimney Crown
The cement top of the chimney can crack from freeze-thaw cycles.
Once water enters, the damage spreads quickly.
3. Missing or Damaged Chimney Cap
Without a cap, rain and snow fall directly into the flue, causing rust, odors, and internal damage.
4. Mortar Joint Deterioration
Mortar breaks down naturally over time, especially with coastal humidity and storms.
5. Porous Brick & Masonry Absorption
Older chimneys absorb water like a sponge.
Waterproofing is essential.
How We Fix Chimney Leaks
We perform full chimney-to-roof leak diagnostics, then provide the correct repair based on the problem:
✔ Flashing Repair & Replacement
- Step flashing installed under shingles
- Counter flashing embedded into mortar joints
- Waterproof sealant applied to all seams
- Stainless steel or aluminum options
Proper flashing repair is the #1 solution for chimney leaks.
✔ Chimney Repointing (Mortar Repair)
Loose or cracked mortar joints are ground out and replaced with fresh, matched mortar to prevent further water entry.
✔ Crown Repair & Rebuilding
A cracked crown allows water to seep into the chimney walls.
We repair or rebuild the crown with long-lasting, weather-resistant materials.
✔ Chimney Cap Installation
A stainless steel cap prevents direct rain entry, animal nests, and moisture damage.
✔ Chimney Waterproofing
We apply a professional-grade breathable masonry sealer that prevents water absorption without trapping moisture.
Signs Your Chimney Is Leaking
Call for service if you notice:
- Water stains on ceilings or walls
- Damp or musty odors near the fireplace
- Drips inside the firebox
- Rust on the damper or firebox
- Bubbling or peeling paint
- Mold or mildew around the chimney
- Shingles lifting near the chimney
- Soft or rotted wood in the attic
Leaks often start small — catching them early saves thousands in repairs.
Why Chimney Leaks Are So Common on Long Island
Suffolk County’s weather is tough on chimneys:
- Salt air
- Coastal humidity
- Heavy rainstorms
- Strong winds
- Freeze-thaw cycles
- Older home construction
This environment accelerates masonry deterioration and flashing corrosion, making regular maintenance essential.
Before & After
Schedule a Chimney Leak Inspection
Village Chimney provides:
- Chimney leak detection
- Flashing repair & replacement
- Crown repair
- Masonry repointing
- Waterproofing
- Licensed & insured service
- Free estimates
- Senior discounts
Related Services
- Chimney Repairs
- Masonry Repair & Repointing
- Chimney Caps
- Chimney Cleaning
- Chimney Inspections
- Service Areas – Suffolk County
Serving all of Suffolk County.
Call (516) 232-5326 or email
villagechimney@yahoo.com.


